DRY CHEMICAL POWDER
Suitable For: Fired on ordinary combustible materials, highly flammable liquids, gases expelled under pressure and fires under electric tension.
 Specification: BSS 5423
Construction: Main body of 2 deep-drawn shells, welded together, Tested to 25 Kg/cm sq. (350 lbs psi)
Protection: Epoxy polyester powder coating by electrostatic process and then stoved to 200 degrees centigrade.
Colour: Red with instructional label.
Design: Extinguishes contain dry powder in main body which is pressurized with nitrogen. Pressure gauge fitted at front gives all-time indication whether extinguisher is charged or needs refilling.
Operation: By depressing operating lever, nitrogen is released which expels dry powder through distribution hose and discharge nozzle.
| Model |
Power Content |
Discharge Time |
Max. Range |
House Length |
Type of Discharge |
Total Weight |
For Class |
| DC-SP-1 |
1. 0 Kg (2.2 lbs) |
4-5 Second |
3-5 m (10 - 16 ft) |
Nil |
controlled |
2.0 Kg. |
ABCE* |
| DC-SP-2 |
2.0 Kg (4.4 lbs) |
8-10 Seconds |
4 - 6 m (13 - 20 ft) |
Nil |
controlled |
3.6 Kg. |
ABCE* |
| DC-SP-4 |
4.0 Kg (8.8 lbs) |
9-11 Seconds |
5 - 7 m ( 16 - 22 ft) |
Nil |
controlled |
6.2 Kg. |
ABCE* |
| DC-SP-6 |
6.0 Kg. (13.0 lbs) |
14-18 Seconds |
5-8 m (16 - 25 ft) |
38 cm (15 inch) |
controlled |
8.75 Kg. |
ABCE* |
| DC-SP-12 |
12.0 Kg 26.0 lbs |
18-22 Seconds |
5-8 m (16 - 25 ft |
45 cm ( 18 inch) |
controlled |
15.50 Kg. |
ABCE* |
Water
A new fire extinguisher for class 'A' fire risk where soda acid fire extinguishers are being used. Being free from my acid, it is safe for the operator and non-damaging to the material.
 |
MODEL |
W - SP - 10 |
| SPECIFICATIONS |
BSS 5423 |
| CAPACITY |
10 Litres ( 2 gallons) |
| THROW |
7- 8 meters ( 25 - 39 feet ) |
| DISCHARGE TIME |
60 - 90 Seconds |
| DESIGN |
Main body contains water which is pressurized by nitrogen gas. By squeezing the level, water is released. Pressure gauge at the front indicates inside pressure. |
| TO OPERATE |
By Squeezing level. Discharge can be interrupted. |
| CONSTRUCTION |
2 deep drawn halves of 18 swg (1.22 mm ) M.S. Sheet welded together. |
| TEST PRESSURE |
25 Kg/Cm 2 ( 350 lbs per Sq. Inch) |
| PROTECTION |
Coated internally and externally with Epoxy Polyester powder by electrostatic process and then stoved to 200 o C |
| FINISH |
Red, with instructional label. |
| FOR CLASS |
A |
AFFF
Suitable for: Fires of oil, petrol paints, varnishes and other highly inflammable liquids.
 |
MODEL |
AFFF - 10 |
| TYPE |
AFFF Foam |
| CAPACITY |
9 Litres ( 2 gallons) |
| CONTENTS |
0.57 litres of AFFF mixed with 8.5 litres of water and pressurized with compressed Air. |
| SPECIFICATIONS |
B.S.S 5423 |
| OPERATING |
By squeezing operating level. |
| DURATION OF DISCHARGE |
30 - 50 seconds |
| THROW |
6.7 meters (20 - 25 feet) |
| CONSTRUCTION |
2 deep drawn halves of 18 swg (1.22 mm) M.S. Sheet welded together. |
| TEST PRESSURE |
25 Kg/Cm 2 ( 350 lbs per Sq. Inch) |
| PROTECTION |
Special epoxy polyester powder coating by electrostatic process, on internal and external surfaces. |
| FINISH |
Red, with instructional label. |
| FOR CLASS |
A & B |
|
